| ASCII - Command | CARDSAVE | |||
| Syntax Transmit | CARDSAVE | |||
| Syntax Receive | CARDSAVE | Available in | ||
| Type | Command | MMI | No | |
| ASCII Format | Command | CANBus Object Number | - | |
| DIM | - | PROFIBUS PNU | - | |
| Range | DPR | No | ||
| Default | - | |||
| Opmode | All | Data Type Bus/DPR | - | |
| Drive State | Disabled | Weighting | ||
| Start Firmware | 3.60 | |||
| Configuration | No | Last Change of this Object | ||
| Function Group | SD-Card | EEPROM | No | |
| Short Description | save data from the drive to the SD memory card | |||
Description
| CARDSAVE <Option> “name" Saves firmware/data component of the S700 to the card with filename "name". CARDSAVE concern the amplifier's firmware, and must therefore be operated with disabled output stage. When the command is finished, the amplifier is restarted automatically. Save and load of amplifier parameters (option PARAM) or Safety parameters (option SAFETY) can be operated with enabled output stage. Nearly all data which have been saved with the command CARDSAVE are binary coded, except the parameter file saved by CARDSAVE PARAM, that is saved as ASCII file. This file can be read and edit with the setup software DriveGUI. |