| ASCII - Command | CARDUPDATE | |||
| Syntax Transmit | CARDUPDATE | |||
| Syntax Receive | CARDUPDATE | Available in | ||
| Type | Command | MMI | No | |
| ASCII Format | Command | CANBus Object Number | - | |
| DIM | PROFIBUS PNU | - | ||
| Range | DPR | No | ||
| Default | - | |||
| Opmode | All | Data Type Bus/DPR | - | |
| Drive State | Disabled | Weighting | ||
| Start Firmware | 3.60 | |||
| Configuration | No | Last Change of this Object | ||
| Function Group | SD-Card | EEPROM | No | |
| Short Description | load data from the SD memory card to the drive | |||
Description
| CARDUPDATE <Option> “name" Loads a firmware/data component from the card to the flash Eeprom of the S700. CARDUPDATE concerns the amplifier's firmwareand must therefore be operated with disabled output stage only. When the command is finished, the amplifier is restarted automatically. Save and load of amplifier parameters (option PARAM) can be operated with enabled output stage. The command „CARDUPDATE <option> <name>“ expects for the "name" either a binary file or an S- Record file. Binary data have been usually saved before with the command CARDSAVE. S- Record files are for example the firmware file, that has been downloaded from our website. |