| ASCII - Command | EN22DCNT | |||
| Syntax Transmit | EN22DCNT | |||
| Syntax Receive | EN22DCNT <Data> | Available in | ||
| Type | Variable ro | MMI | No | |
| ASCII Format | Integer16 | CANBus Object Number | 3910 (hex) | |
| DIM | - | PROFIBUS PNU | 1840 (dec) IND = 33 (dec) | |
| Range | 0 .. 65535 | DPR | 1040 (dec) | |
| Default | - | |||
| Opmode | All | Data Type Bus/DPR | Integer16 | |
| Drive State | - | Weighting | ||
| Start Firmware | 5.91 | |||
| Configuration | No | Last Change of this Object | 2.12 | |
| Function Group | feedback | EEPROM | No | |
| Short Description | Endat 2.2 status of the diagnostic information | |||
Description
| This parameter is a bit variable. If the bit is set, the associated diagnostic information is available. If the bit isn't set, the corresponding information is not supported by the ENDAT2.2 encoder. The individual bits are assigned the following information: Bit 0 - Evaluation number 1 Bit 1 - Evaluation number 2 Bit 2 - Evaluation number 3 Bit 3 - Rating number 4 Bit 4 - Evaluation number 5 Bit 5 - Evaluation number 6 Bit 6 ... 14 is free Bit 15 - system specific data |