ASCII - Command MAXTEMPH    
Syntax Transmit MAXTEMPH [Data]    
Syntax Receive MAXTEMPH <Data>   Available in  
Type Variable rw   MMI Yes
ASCII Format Integer16   CANBus Object Number 3585 (hex)
DIM Centigrade Degrees   PROFIBUS PNU 1733 (dec) IND = 1 (dec)
Range 20 ... 85   DPR 133 (dec)
Default 80    
Opmode All   Data Type Bus/DPR Integer16
Drive State -   Weighting  
Start Firmware 1.0    
Configuration No   Last Change of this Object 2.10
Function Group temperatures   EEPROM Yes
Short Description Heat Sink Temperature Switch off Threshold

Description

The heat sink temperature for switching off. If the heat sink temperature (as given by TEMPH) exceeds this value, the drive faults.

The following max. limits are:
S300: 85 degree
S700: 90 degree
S748/S772 : 105 degree