| ASCII - Command | O1 | |||
| Syntax Transmit | O1 [Data] | |||
| Syntax Receive | O1 <Data> | Available in | ||
| Type | Variable rw | MMI | Yes | |
| ASCII Format | Integer8 | CANBus Object Number | 35AE (hex) | |
| DIM | - | PROFIBUS PNU | 1774 (dec) IND = 1 (dec) | |
| Range | DPR | 174 (dec) | ||
| Default | - | |||
| Opmode | All | Data Type Bus/DPR | Integer8 | |
| Drive State | - | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 1.0 | |
| Function Group | digital I/O | EEPROM | No | |
| Short Description | State of Digital Output 1 | |||
Description
| S300: The O1 command returns the state of the digital output 1 (0 = Low,1 = High). If no function (O1MODE=0) is assigned to digital output 1 , then the High/Low state can be given out at output 1 by using the command “O1 1” or “O1 0”. S700: The O1 command returns the state of the digital output 1 (0 = Low,1 = High). If the function (O1MODE=23) is assigned to digital output 1 , then the High/Low state can be given out at output 1 by using the command “O1 1” or “O1 0”. |