| ASCII - Command | PASSCNFG | |||
| Syntax Transmit | PASSCNFG [Data] | |||
| Syntax Receive | PASSCNFG <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer8 | CANBus Object Number | 36D8 (hex) | |
| DIM | - | PROFIBUS PNU | 1672 (dec) IND = 17 (dec) | |
| Range | 0 .. 2 | DPR | 472 (dec) | |
| Default | 0 | |||
| Opmode | Data Type Bus/DPR | Integer8 | ||
| Drive State | Weighting | |||
| Start Firmware | 3.00 | |||
| Configuration | No | Last Change of this Object | 2.10 | |
| Function Group | drive configuration | EEPROM | ||
| Short Description | Password Function | |||
Description
| The command PASSCNFG sets the passwort-function. PASSCNFG = 0 all parameter writing procedures are locked PASSCNFG = 1 only parameter SAVE is locked PASSCNFG = 2 parameter access isn't possible (no reading and no writing). Only the command PASS is permitted PASSCNFG = 3 commands RSTVAR and SAVE are not allowed and only after entering a password (PASS/PASSX) are executed. Please have a look to: PASS, PASSX |