ASCII - Command | PBALRES | |||
Syntax Transmit | PBALRES [Data] | |||
Syntax Receive | PBALRES <Data> | Available in | ||
Type | Variable rw | MMI | Yes | |
ASCII Format | Integer8 | CANBus Object Number | 35C2 (hex) | |
DIM | - | PROFIBUS PNU | 1794 (dec) IND = 1 (dec) | |
Range | 0 ... 200 | DPR | 194 (dec) | |
Default | 0 | |||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State | Disabled + Reset (Coldstart) | Weighting | ||
Start Firmware | 1.0 | |||
Configuration | Yes | Last Change of this Object | 1.0 | |
Function Group | drive configuration | EEPROM | Yes | |
Short Description | Select Regen Resistor |
Description
This parameter can be used to select whether the internal (0) or an external (> 0) regen resistor should be used.The value > 0 sets the regen resistor in ohm. Note: The allowed resistor value depends to the used drive type. Look into the installation manuel for the data, please. It affects the PBALMAX parameter. |