ASCII - Command | REFLS | |||
Syntax Transmit | REFLS [Data] | |||
Syntax Receive | REFLS <Data> | Available in | ||
Type | Variable rw | MMI | No | |
ASCII Format | Integer32 | CANBus Object Number | 365D (hex) | |
DIM | - | PROFIBUS PNU | 1949 (dec) IND = 1 (dec) | |
Range | 0, 1, 2, 3 | DPR | 349 (dec) | |
Default | 0 | |||
Opmode | 8 | Data Type Bus/DPR | Integer32 | |
Drive State | - | Weighting | ||
Start Firmware | 1.0 | |||
Configuration | No | Last Change of this Object | 1.0 | |
Function Group | position loop | EEPROM | Yes | |
Short Description | Effect HW-limitswitches by homing |
Description
REFLS defines the drive behavior when activating a hardware limit during a homing move. REFLS=0 Change direction at NSTOP and PSTOP REFLS=1 Change direction at PSTOP, create error message F26 (limit switch) at NSTOP REFLS=2 Change direction at NSTOP, create error message F26 (limit switch) at PSTOP REFLS=3 Create error message F26 (limit switch) at NSTOP and PSTOP REFLS used when /NREF/ ( homing mode) = 1 or 3 |