| ASCII - Command | AN11NR | |||
| Syntax Transmit | AN11NR [Data] | |||
| Syntax Receive | AN11NR <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer8 | CANBus Object Number | 3699 (hex) | |
| DIM | - | PROFIBUS PNU | 2009 (dec) IND = 1 (dec) | |
| Range | 0, 1, 2, 3, 4 | DPR | 409 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer8 | |
| Drive State | Disabled + Reset (Coldstart) | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | Yes | Last Change of this Object | 1.01 | |
| Function Group | analog I/O | EEPROM | Yes | |
| Short Description | No. of INxTRIG variable, that is changed analog | |||
Description
| The parameter AN11NR defines the number (x) of the auxiliary variable IN1TRIG, IN2TRIG, IN3TRIG or IN4TRIG, which can be changed by the analog input 2: This parameter has effect only with ANCNFG=11 and ANCNFG=12. |