Syntax Transmit CALCPOSIO    
Syntax Receive CALCPOSIO <Data>   Available in  
Type Command   MMI No
ASCII Format Command   CANBus Object Number 38A6 (hex)
DIM     PROFIBUS PNU 1734 (dec) IND = 33 (dec)
Range     DPR 934 (dec)
Default -    
Opmode All   Data Type Bus/DPR Integer32
Drive State -   Weighting  
Start Firmware 3.75 - 5.02    
Configuration No   Last Change of this Object 2.4
Function Group drive configuration   EEPROM No
Short Description Initialisation of the POS I/O card


Initialisation of the POS I/O card. This command has to be done once (with no X3C connector plugged in) after error F20 “POSIO data bcc error” occurred.

Only for S700: FW 3.75/5.02