| ASCII - Command | CSSTAT | |||
| Syntax Transmit | CSSTAT [Data] | |||
| Syntax Receive | CSSTAT <Data> | Available in | ||
| Type | Variable ro | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 3890 (hex) | |
| DIM | PROFIBUS PNU | 1712 (dec) IND = 33 (dec) | ||
| Range | 0 .. 2147483647 | DPR | 912 (dec) | |
| Default | - | |||
| Opmode | All | Data Type Bus/DPR | - | |
| Drive State | Weighting | |||
| Start Firmware | 5.18 | |||
| Configuration | No | Last Change of this Object | 2.7 | |
| Function Group | safety | EEPROM | No | |
| Short Description | Status information of safety card | |||
Description
| The CSSTAT command returns the internal status information of the safety card in the form of a bit-variable. Bit Description 0 LED POWER, Status LED 'POWER' on the front panel of the safety card 1 LED RUN, Status LED 'RUN' on the front panel of the safety card 2 LED CONFIG, Status LED 'CONFIG' on the front panel of the safety card 3 LED FAULT, Status LED 'FAULT' on the front panel of the safety card 4 STO, internal state 'STO' (0 = STO inactive, 1 = STO active) 5 Download OK, successful download of the configuration file 8 STARTUP, bit is set if internal state of the safety card is 'STARTUP' 9 RUN, bit is set if internal state of the safety card is 'RUN' 10 STOP, bit is set if internal state of the safety card is 'STOP' 11 CONFIG, bit is set if internal state of the safety card is 'CONFIG' |