| ASCII - Command | CTUNE | |||
| Syntax Transmit | CTUNE | |||
| Syntax Receive | CTUNE | Available in | ||
| Type | Command | MMI | No | |
| ASCII Format | Command | CANBus Object Number | - | |
| DIM | Hz | PROFIBUS PNU | - | |
| Range | 500 ... 2500 | DPR | No | |
| Default | - | |||
| Opmode | All | Data Type Bus/DPR | - | |
| Drive State | Enabled | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 1.0 | |
| Function Group | drive configuration | EEPROM | No | |
| Short Description | Calculate current parameters | |||
Description
| This command calculates current parameters. Set the OPMODE = 2 before starting. An optional parameter for the bandwidth can be set for the tuning process. The default data is with FILTMODE = 2 1800 Hz else 1200 HZ |