| ASCII - Command | DIRIN | |||
| Syntax Transmit | DIRIN [Data] | |||
| Syntax Receive | DIRIN <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 389D (hex) | |
| DIM | - | PROFIBUS PNU | 1725 (dec) IND = 33 (dec) | |
| Range | 0...2147483647 | DPR | 925 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | Disabled + Reset (Coldstart) | Weighting | ||
| Start Firmware | 3.66 | |||
| Configuration | Yes | Last Change of this Object | 2.4 | |
| Function Group | digital I/O | EEPROM | Yes | |
| Short Description | polarity of the digital inputs | |||
Description
| Defines the polarity of the digital inputs of the drive DIRIN is a bit parameter. A single bit x of this variable is assigned to the digital input INx. A bit state of 1 inverts the corresponding digital input. This function is available only for the inputs IN1,IN2,IN3,IN4 (IN21,IN22 for S700) |