| ASCII - Command | EGEARI | |||
| Syntax Transmit | EGEARI [Data] | |||
| Syntax Receive | EGEARI <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 350D (hex) | |
| DIM | - | PROFIBUS PNU | 1613 (dec) IND = 1 (dec) | |
| Range | 1 ... long Integer | DPR | 13 (dec) | |
| Default | 1 | |||
| Opmode | 4 ... 8 | Data Type Bus/DPR | Integer32 | |
| Drive State | Disable | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 1.0 | |
| Function Group | feedback | EEPROM | Yes | |
| Short Description | Ratio external feedback | |||
Description
| In case an external feedback system is used the ratio can be set by EGEARI and EGEARO. The feedbackturn are set by EGEARI the motor turn by EGEARO This setting affects only to generation of command velocity. It has no effect on the emulated respectively acquired position (ROD/SSI). |