| ASCII - Command | ERRCNFG | |||
| Syntax Transmit | ERRCNFG [Data] | |||
| Syntax Receive | ERRCNFG <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 3884 (hex) | |
| DIM | - | PROFIBUS PNU | 1700 (dec) IND = 33 (dec) | |
| Range | -2147483648 .. 2147483647 | DPR | 900 (dec) | |
| Default | 83894274 (0x50002002) | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | Weighting | |||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 2.8 | |
| Function Group | other commands | EEPROM | Yes | |
| Short Description | behavior of the drive in the case of error | |||
Description
| The command ERRCNFG defines the behavior of the drive in the case of error massage Fxx. If the bit number xx of the ERRCNFG parameter is set to 1, then the corresponding error message FXX+1 generates an immediately power stage disable (no matter what is the setting of ACTFAULT). Example: The default value 83894274 (-> 0x0500 2002) disables immediately the output stage in case of error: F02 Fault over voltage F14 Output stage fault F25 Commutation Error F27 „AS-Option“ Error In some critical error situations, the output stage is disabled immediately. Then the setting ACTFAULT = 1 has no function. See also command ERRCODE, ERRCODE * |