| ASCII - Command | LATCH1N32 | |||
| Syntax Transmit | LATCH1N32 [Data] | |||
| Syntax Receive | LATCH1N32 <Data> | Available in | ||
| Type | Variable ro | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 357D (hex) | |
| DIM | - | PROFIBUS PNU | 1725 (dec) IND = 1 (dec) | |
| Range | - | DPR | 125 (dec) | |
| Default | - | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | - | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 1.0 | |
| Function Group | digital I/O | EEPROM | No | |
| Short Description | Latched 32-bit Position (negative edge) | |||
Description
| The LATCH1N32 command returns the position where latching was performed by the last negative (falling) edge on digital input 1 (IN1MODE=26). The position value is absolute within 4096 turns, and is given out in microns (taking account of the position control loop resolution PGEARI/PGEARO). To obtain an absolute position within one turn, the LATCH1N16 command should be used. The commands LATCH1N16 and LATCH1N32 have the effect of erasing the status bit 23 “negative latch made” in the status register TRJSTAT. |