| ASCII - Command | O3_18MODE | |||
| Syntax Transmit | ||||
| Syntax Receive | Available in | |||
| Type | Variable rw | MMI | Yes | |
| ASCII Format | Integer8 | CANBus Object Number | - | |
| DIM | - | PROFIBUS PNU | - | |
| Range | 0 .. 100 | DPR | (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer8 | |
| Drive State | Disabled + Reset (Coldstart) | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | Yes | Last Change of this Object | 2.1 | |
| Function Group | digital I/O | EEPROM | Yes | |
| Short Description | Function of Digital Outputs 3 to 18 | |||
Description
| This is a group description of the function of digital output 3 to 18 example: The O3 command returns the state of the digital output O3 (0 = Low,1 = High). If no function is assigned to digital output 3 (O3MODE=0), then the High/Low state can be given out at output 3 by using the command “O3 1” or “O3 0”. |