| ASCII - Command | O_FT | |||
| Syntax Transmit | O_FT [Data] | |||
| Syntax Receive | O_FT <Data> | Available in | ||
| Type | Variable rw | MMI | Yes | |
| ASCII Format | Integer16 | CANBus Object Number | 35BD (hex) | |
| DIM | ms | PROFIBUS PNU | 1789 (dec) IND = 1 (dec) | |
| Range | 0 .. 32767 | DPR | 189 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer16 | |
| Drive State | - | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 2.13 | |
| Function Group | position loop | EEPROM | No | |
| Short Description | Delay before Next Motion Task | |||
Description
| This parameter can be used to delay the start of the next motion task (if one is defined). This parameter is only evaluated if bit 3 (next task activated) and bit 7 (delay time activated) of the motion task control word are set. |