| ASCII - Command | PNGWAY | |||
| Syntax Transmit | PNGWAY | |||
| Syntax Receive | PNGWAY <Data> | Available in | ||
| Type | Variable rw | MMI | Yes | |
| ASCII Format | String | CANBus Object Number | - | |
| DIM | Netmask-Address | PROFIBUS PNU | - | |
| Range | [0 … 255].[0 … 255].[0 … 255].[0 … 255] | DPR | No | |
| Default | 0.0.0.0 | |||
| Opmode | All | Data Type Bus/DPR | - | |
| Drive State | - | Weighting | ||
| Start Firmware | 6.02 | |||
| Configuration | No | Last Change of this Object | 2.15 | |
| Function Group | fieldbus | EEPROM | No | |
| Short Description | PROFINET Gateway Address | |||
Description
| This command is used to assign the PROFINET gateway address. PNGWAY (retentively stored gateway) - String. Example: 192.168.0.1 - valid gatewy after the next boot / is used to configure the Profinet stack |