| ASCII - Command | PNIP | |||
| Syntax Transmit | PNIP | |||
| Syntax Receive | PNIP <Data> | Available in | ||
| Type | Command | MMI | Yes | |
| ASCII Format | String | CANBus Object Number | - | |
| DIM | IP-Adresse | PROFIBUS PNU | - | |
| Range | [0 … 255].[0 … 255].[0 … 255].[0 … 255] | DPR | No | |
| Default | 0.0.0.0 | |||
| Opmode | All | Data Type Bus/DPR | - | |
| Drive State | Disabled + Reset (Coldstart) | Weighting | ||
| Start Firmware | 6.02 | |||
| Configuration | No | Last Change of this Object | 2.15 | |
| Function Group | fieldbus | EEPROM | Yes | |
| Short Description | PROFINET IP Address | |||
Description
| Indicates the (remanently) stored PROFINET IP address. Can be entered manually, but is usually assigned by the Controller. Example: --> PNIP 192.168.0.3 - The value must be a valid IP address. - The valid IP address is entered after the next cold start. |