ASCII - Command | PNNMASKACT | |||
Syntax Transmit | PNNMASKACT | |||
Syntax Receive | PNNMASKACT <Data> | Available in | ||
Type | Variable ro | MMI | Yes | |
ASCII Format | String | CANBus Object Number | - | |
DIM | Netmask-Adresse | PROFIBUS PNU | - | |
Range | [0 … 255].[0 … 255].[0 … 255].[0 … 255] | DPR | No | |
Default | 0.0.0.0 | |||
Opmode | All | Data Type Bus/DPR | - | |
Drive State | - | Weighting | ||
Start Firmware | 6.02 | |||
Configuration | No | Last Change of this Object | 2.15 | |
Function Group | fieldbus | EEPROM | No | |
Short Description | Currently valid PROFINET network mask |
Description
Indicates the currently valid PROFINET Subnet Mask. Example: -->PNNMASKACT 192.168.0.2 - The user can show the value of the variable PNNMASKACT in DriveTerminal. - The value of PNNMASKACT can differ from the PNNMASK. - The value of PNNMASKACT always corresponds to PNNMASK after a cold start. - The value of PNNMASKACT can only be changed by the Controller during operation. Then there is a flag (temporary) for the transfer in PNNMASK. Attention: If this flag is not set, PNNMASK will be deleted (0.0.0.0). |