| ASCII - Command | TBRAKE | |||
| Syntax Transmit | TBRAKE [Data] | |||
| Syntax Receive | TBRAKE <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer16 | CANBus Object Number | 366E (hex) | |
| DIM | ms | PROFIBUS PNU | 1966 (dec) IND = 1 (dec) | |
| Range | 10 .. 10000 | DPR | 366 (dec) | |
| Default | 100 | |||
| Opmode | All | Data Type Bus/DPR | Integer16 | |
| Drive State | - | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 1.0 | |
| Function Group | motor | EEPROM | Yes | |
| Short Description | Disable Delaytime with Holding Brake | |||
Description
| TBRAKE defines a disable delay time with holding brake. If the drive is disabled, it controls the holding brake if selected. After the motor is stopped, the holding brake is switched off and a delay timer (value is TBRAKE) is started. When the time is gone, the drive is disabled. |