ASCII - Command | UVLTMODE | |||
Syntax Transmit | UVLTMODE [Data] | |||
Syntax Receive | UVLTMODE <Data> | Available in | ||
Type | Variable rw | MMI | No | |
ASCII Format | Integer8 | CANBus Object Number | 3617 (hex) | |
DIM | - | PROFIBUS PNU | 1879 (dec) IND = 1 (dec) | |
Range | 0, 1 | DPR | 279 (dec) | |
Default | 1 | |||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State | Disabled + Reset (Coldstart) | Weighting | ||
Start Firmware | 1.0 | |||
Configuration | Yes | Last Change of this Object | 1.0 | |
Function Group | drive configuration | EEPROM | Yes | |
Short Description | Undervoltage Mode |
Description
The configuration variable UVLTMODE activates or inhibits the undervoltage monitoring of the amplifier. If the monitoring is activated (UVLTMODE=1), then the fault message F05 (undervoltage) is generated as soon a s the DC-bus voltage falls below the undervoltage threshold VBUSMIN and the output stage is activated . |