| ASCII - Command | WPOSE | |||
| Syntax Transmit | WPOSE | |||
| Syntax Receive | WPOSE <Data> | Available in | ||
| Type | Variable ro | MMI | No | |
| ASCII Format | Integer32 | CANBus Object Number | 363F (hex) | |
| DIM | - | PROFIBUS PNU | 1919 (dec) IND = 1 (dec) | |
| Range | 0 ..65535 | DPR | 319 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | - | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | No | Last Change of this Object | 1.0 | |
| Function Group | position loop | EEPROM | No | |
| Short Description | Enable fast position registers 1 ... 16 | |||
Description
| The bit-variable WPOSE is used to configure the fast position registers P1 ... P16 individually. The WPOSE variable can be considered as a 32-bit variable, whereby the lower 16 bits (bits 0 ... 15) are used for the configuration of the position registers P1 ... P16. Bit=0 the corresponding position register is not monitored Bit=1 the position register is monitored See also WPOS |