| ASCII - Command | WSTIME2 | |||
| Syntax Transmit | WSTIME2 [Data] | |||
| Syntax Receive | WSTIME2 <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Integer16 | CANBus Object Number | 3863 (hex) | |
| DIM | ms | PROFIBUS PNU | 1667 (dec) IND = 33 (dec) | |
| Range | 0 .. 500 | DPR | 867 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer16 | |
| Drive State | - | Weighting | ||
| Start Firmware | 2.26 | |||
| Configuration | No | Last Change of this Object | 2.1 | |
| Function Group | wake&shake | EEPROM | Yes | |
| Short Description | W&S delay time | |||
Description
| WSTIME2 defines the delay time of the W&S - function for FBTYPE = 7 and 8. This time is a delay time between the switching of different current vectors during the wake & shake procedure.The default value for this delay is 1 msec (WSTIME2=0). This time should be increased in the case of movement interferences between single current vectors. |