Setup Software installation

Minimum requirements for the PC

Processor	at least Pentium® II or comparable
Operating system	WINDOWS 2000 / XP / VISTA / 7 / 8 / 10
Graphics adapter	Windows compatible, color
Drives	hard disk with at least 20 MB free space, CD-ROM drive
Interface	one free serial interface (COM1 to COM10)

With other operating systems an emergency operation is feasible through an ASCII terminal emulation (without graphical user interface).

Interface settings : 38400 bps, databit 8, no parity, stopbit 1, no flow control.

On the CD-ROM you can find an installation program, which makes it easy to install the setup software on your PC.

Install

Autostart function activated:

Insert the CD-ROM into a free drive. A window with the start screen opens. There you find a link to the setup software DRIVEGUI.exe. Click it and follow the instructions.

Autostart function deactivated:

Insert the CD-ROM into a free drive. Click on START (task bar), then on Run. Enter the program call: x:\autorun.exe or x:\index.htm (x = correct CD drive letter).

Click OK and proceed as described above.

Connection to the serial interface of the PC

Connect the interface cable to a serial interface on your PC (COM: to COM10) and to the serial interface of the servo amplifier (see Instructions Manual). USB to serial converter can be used optionally.