ASCII - Command | CPHASE | |||
Syntax Transmit | CPHASE [Data] | |||
Syntax Receive | CPHASE <Data> | Available in | ||
Type | Variable rw | MMI | No | |
ASCII Format | Integer8 | CANBus Object Number | No | |
DIM | - | PROFIBUS PNU | No | |
Range | 0, 1 | DPR | No | |
Default | 1 | |||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State | Disable + Reset (Coldstart) | Weighting | ||
Start Firmware | 5.41 | |||
Configuration | Yes | Last Change of this Object | 1.9 | |
Function Group | Motor | EEPROM | Yes | |
Short Description | Deactivate Motor Connection Detection |
Description
The motor connection detection trips, if a cable is broken or not connected. CPHASE = 0 disables this function |