| ASCII - Command | J | |||
| Syntax Transmit | J [Data] | |||
| Syntax Receive | J <Data> | Available in | ||
| Type | Command | MMI | Yes | |
| ASCII Format | Float | CANBus Object Number | No | |
| DIM | rpm (velocity) / Milliseconds (Time) | PROFIBUS PNU | No | |
| Range | -15000.0 .. 15000.0 (=velocity),long int (Time) | DPR | No | |
| Default | - | |||
| Opmode | 0 | Data Type Bus/DPR | - | |
| Drive State | Enabled | Weighting | ||
| Start Firmware | 1.20 | |||
| Configuration | No | Last Change of this Object | 1.3 | |
| Function Group | Oscilloscope | EEPROM | - | |
| Short Description | Service Function: Constant Velocity | |||
Description
| The command “J <n> <t>” can be used to define a constant velocity <n> (in rpm) for a defined time <t> (in msec). If the <t> entry is missing, the drive runs continuously. |