ASCII - Command | MAXTEMPH | |||
Syntax Transmit | MAXTEMPH [Data] | |||
Syntax Receive | MAXTEMPH <Data> | Available in | ||
Type | Variable rw | MMI | Yes | |
ASCII Format | Integer16 | CANBus Object Number | 3585 (hex) | |
DIM | Centigrade Degrees | PROFIBUS PNU | 1733 (dec) IND = 1 (dec) | |
Range | 20 .. 85 (90 ;SR640,SR670) | DPR | 133 (dec) | |
Default | 80 | |||
Opmode | All | Data Type Bus/DPR | Integer16 | |
Drive State | - | Weighting | ||
Start Firmware | 1.20 | |||
Configuration | No | Last Change of this Object | 1.8 | |
Function Group | Basic Setup | EEPROM | Yes | |
Short Description | Heat Sink Temperature Switch off Threshold |
Description
The heat sink temperature for switching off. If the heat sink temperature (as given by TEMPH) exceeds this value, the drive faults. |