| ASCII - Command | MTR | |||
| Syntax Transmit | MTR [Data] | |||
| Syntax Receive | MTR <Data> | Available in | ||
| Type | Variable rw | MMI | No | |
| ASCII Format | Float | CANBus Object Number | 366C (hex) | |
| DIM | ms | PROFIBUS PNU | 1964 (dec) IND = 1 (dec) | |
| Range | 30 .. 1000 | DPR | 364 (dec) | |
| Default | 200 | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | - | Weighting | 1000 | |
| Start Firmware | 3.40 | |||
| Configuration | No | Last Change of this Object | 1.4 | |
| Function Group | Motor | EEPROM | Yes | |
| Short Description | Rotor Time Constant | |||
Description
| This command is only for the induction motor mode (MTYPE = 3). The MTR defines the rotor time constant at the rated operating point (Tr = Lh/Rr), where Lh and Rr are the magnetizing inductance and rotor resistance, respectively. |