ASCII - Command | SWE2N | |||
Syntax Transmit | SWE2N [Data] | |||
Syntax Receive | SWE2N <Data> | Available in | ||
Type | Variable rw | MMI | Yes | |
ASCII Format | Integer32 | CANBus Object Number | 3607 (hex) | |
DIM | - | PROFIBUS PNU | 1863 (dec) IND = 1 (dec) | |
Range | long int | DPR | 263 (dec) | |
Default | 0 | |||
Opmode | All | Data Type Bus/DPR | Integer32 | |
Drive State | - | Weighting | ||
Start Firmware | 1.71 | |||
Configuration | No | Last Change of this Object | 1.3 | |
Function Group | Position Controller | EEPROM | Yes | |
Short Description | Position register 2 (Cam) |
Description
The variable SWE2N contains the cam position value for position register 2. The scaling of the position depends on the PGEARI / PGEARO / PRBASE parameters, and is calculated according to the following formula: SWE2N[increments] = SWE2N[input] * PGEARO / PGEARI 1048576 increments/turn for PRBASE=20 65536 increments/turn for PRBASE=16 see also description of SWCNFG |