ASCII - Command | VSCALE2 | |||
Syntax Transmit | VSCALE2 [Data] | |||
Syntax Receive | VSCALE2 <Data> | Available in | ||
Type | Variable rw | MMI | Yes | |
ASCII Format | Integer16 | CANBus Object Number | 362A (hex) | |
DIM | ( > VUNIT) | PROFIBUS PNU | 1898 (dec) IND = 1 (dec) | |
Range | -15000 .. 15000 | DPR | 298 (dec) | |
Default | 3000 | |||
Opmode | 1 | Data Type Bus/DPR | Integer16 | |
Drive State | - | Weighting | ||
Start Firmware | 1.20 | |||
Configuration | No | Last Change of this Object | 1.8 | |
Function Group | Analog I/O | EEPROM | Yes | |
Short Description | analog input 2 Velocity Scaling Factor |
Description
If the analog input 2 is used as the command input for velocity control, then the VSCALE2 parameter can be used to set the scaling of the input voltage. A 10V velocity command input at analog input 2 produces a velocity of VSCALE2. |