Screen page "Terminal"
Communication with the servo amplifier is made through ASCII commands. You can obtain a complete list of the commands from our application department.
Commands that are sent to the servo amplifier are marked by "-->", the answers from the servo amplifier appear without any preceding characters.
When using this integrated terminal function, the following restrictions apply:
If the number of characters is more than 1000, or the transmission time is more than 3 seconds, then the terminal reports a fault.
Command
Enter the ASCII command here, with the parameters. End the entry with RETURN or operate the APPLY button to start the transmission.
|
The terminal software should be used only by experts. |