| ASCII - Command | PBALRES | |||
| Syntax Transmit | PBALRES [Data] | |||
| Syntax Receive | PBALRES <Data> | Available in | ||
| Type | Variable rw | MMI | Yes | |
| ASCII Format | Integer8 | CANBus Object Number | 35C2 (hex) | |
| DIM | - | PROFIBUS PNU | 1794 (dec) IND = 1 (dec) | |
| Range | 0 ... 200 | DPR | 194 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer8 | |
| Drive State | Disabled + Reset (Coldstart) | Weighting | ||
| Start Firmware | 1.0 | |||
| Configuration | Yes | Last Change of this Object | 1.0 | |
| Function Group | drive configuration | EEPROM | Yes | |
| Short Description | Select Regen Resistor | |||
Description
| This parameter can be used to select whether the internal (0) or an external (> 0) regen resistor should be used.The value > 0 sets the regen resistor in ohm. Note: The allowed resistor value depends to the used drive type. Look into the installation manuel for the data, please. It affects the PBALMAX parameter. |