| ASCII - Command | PNGWAYACT | |||
| Syntax Transmit | PNGWAYACT | |||
| Syntax Receive | PNGWAYACT <Data> | Available in | ||
| Type | Variable ro | MMI | Yes | |
| ASCII Format | String | CANBus Object Number | - | |
| DIM | Netmask-Adresse | PROFIBUS PNU | - | |
| Range | [0 … 255].[0 … 255].[0 … 255].[0 … 255] | DPR | No | |
| Default | 0.0.0.0 | |||
| Opmode | All | Data Type Bus/DPR | - | |
| Drive State | - | Weighting | ||
| Start Firmware | 6.02 | |||
| Configuration | No | Last Change of this Object | 2.15 | |
| Function Group | fieldbus | EEPROM | No | |
| Short Description | Currently valid PROFINET Gateway Address | |||
Description
| Indicates the currently valid PROFINET Gateway address. Example: -->PNGWAYACT 192.168.0.1 - The value is shown only on the Tool DriveTerminal - The value of PNGWAYACT can differ from PNGWAY - After restart the value corresponds to PNGWAYACT = PNGWAY - The value can only be changed by the controller during operation. Then there is also a flag for transfer in PNGWAY. Attention: If the flag for transfer is not set, PNGWAY is deleted (0.0.0.0) |