ASCII - Command | WPOSX | |||
Syntax Transmit | WPOSX [Data] | |||
Syntax Receive | WPOSX <Data> | Available in | ||
Type | Variable rw | MMI | No | |
ASCII Format | Integer32 | CANBus Object Number | 3641 (hex) | |
DIM | - | PROFIBUS PNU | 1921 (dec) IND = 1 (dec) | |
Range | 0 ... 65535 | DPR | 321 (dec) | |
Default | 0 | |||
Opmode | All | Data Type Bus/DPR | Integer32 | |
Drive State | - | Weighting | ||
Start Firmware | 1.0 | |||
Configuration | No | Last Change of this Object | 1.0 | |
Function Group | position loop | EEPROM | No | |
Short Description | Mode of fast position registers 1 ... 16 |
Description
The bit-variable WPOSX can be used to configure the fast position registers P1 ... P16 individually. The WPOSX variable can be considered as a 32-bit variable, whereby the lower 16 bits (bits 0 ... 15) are used for the configuration of the position registers P1 ... P16. Bit=0 Position is monitored permanently Bit=1 Position is monitored once. If a 1 is set the Enable-Bit WPOSE is set to 0, so the monitor function is diabled . See also WPOS |