ASCII - Command DIS    
Syntax Transmit DIS    
Syntax Receive DIS   Available in  
Type Command   MMI Yes
ASCII Format -   CANBus Object Number 352B (hex)
DIM -   PROFIBUS PNU 1643 (dec) IND = 1 (dec)
Range -   DPR 43 (dec)
Default -    
Opmode All   Data Type Bus/DPR -
Drive State Enabled   Weighting  
Start Firmware 1.20    
Configuration No   Last Change of this Object 1.3
Function Group Amplifier   EEPROM -
Short Description Software-Disable


The DIS command sets the software enable for the output stage to 0. Depending on the configuration (see MBRAKE, STOPMODE), the drive will coast down, or be run down under control.