| ASCII - Command | SSIINV | |||
| Syntax Transmit | SSIINV [Data] | |||
| Syntax Receive | SSIINV <Data> | Available in | ||
| Type | Variable rw | MMI | Yes | |
| ASCII Format | Integer8 | CANBus Object Number | 35F7 (hex) | |
| DIM | - | PROFIBUS PNU | 1847 (dec) IND = 1 (dec) | |
| Range | 0, 1 | DPR | 247 (dec) | |
| Default | 0 | |||
| Opmode | All | Data Type Bus/DPR | Integer8 | |
| Drive State | Disabled | Weighting | ||
| Start Firmware | 1.20 | |||
| Configuration | No | Last Change of this Object | 2.0 | |
| Function Group | Feedback | EEPROM | Yes | |
| Short Description | SSI Clock | |||
Description
| The behavior of the SSI interface at X5 (Drive 400 X4). The SSIINV command has different interpretations, depending on whether the SSI is configured as an output or an input. 1. SSI output (GEARMODE != 7, ENCMODE = 2) SSIINV=0 normal clock level SSIINV=1 inverted clock level 2. SSI read-in (GEARMODE = 7, ENCMODE = 2) SSIINV=0 MSB transmitted first SSIINV=1 LSB transmitted first |