ASCII - Command IPEAK    
Syntax Transmit IPEAK [Data]    
Syntax Receive IPEAK <Data>   Available in  
Type Variable rw   MMI Yes
ASCII Format Float   CANBus Object Number 356E (hex)
DIM A   PROFIBUS PNU 1710 (dec) IND = 1 (dec)
Range 0.0 ... DIPEAK   DPR 110 (dec)
Default IMAX    
Opmode All   Data Type Bus/DPR Integer32
Drive State -   Weighting 1000
Start Firmware 1.0    
Configuration No   Last Change of this Object 2.12
Function Group current loop   EEPROM Yes
Short Description Application Peak Current


IPEAK sets the peak rated current IPEAKP and IPEAKN of the application (RMS value). The value to be entered is limited to the lower of the peak rated current of the motor (MIPEAK) or amplifier (DIPEAK). If the IPEAK value is too low, the drive shows following errors and the peak torque is too low. If the IPEAK value is too high, the motor is endangered.