Screen page "Digital I/O"
Cycle time of the digital I/O functions: 1 ms.
The states of the digital
inputs/outputs are shown.
Digital inputs DIGITAL-IN1 / DIGITAL-IN2 / PSTOP / NSTOP
|
Default: 0 |
valid for all OPMODES |
|
|
Default: 0 |
valid for all OPMODES |
The terminals DIGITAL-IN1/2, PSTOP and NSTOP can be used in combination
with internal functions. INxTRIG serves as auxiliary variable.
Change this
only while the amplifier is disabled + reset.
Digital outputs DIGITAL-OUT1 / DIGITAL-OUT2
|
Default: 0 |
valid for all OPMODES |
|
|
Default: 0 |
valid for all OPMODES |
You can combine standard pre-programmed functions with the digital outputs
DIGITAL-OUT1 (O1MODE) or DIGITAL-OUT2 (O2MODE). OxTRIG serves as auxiliary
variable.
Change this only while the amplifier is disabled + reset.
The level information refers to the output at additional inverting interface terminals (e.g. Phoenix DEK-REL-24/I/1), see Product manual.