| ASCII - Command | MSPEED | |||
| Syntax Transmit | MSPEED [Data] | |||
| Syntax Receive | MSPEED <Data> | Available in | ||
| Type | Variable rw | MMI | Yes | |
| ASCII Format | Float | CANBus Object Number | 35A3 (hex) | |
| DIM | rpm | PROFIBUS PNU | 1763 (dec) IND = 1 (dec) | |
| Range | 0.0 .. 12000.0 | DPR | 163 (dec) | |
| Default | 3000 | |||
| Opmode | All | Data Type Bus/DPR | Integer32 | |
| Drive State | - | Weighting | 1000 | |
| Start Firmware | 1.20 | |||
| Configuration | No | Last Change of this Object | 1.3 | |
| Function Group | Motor | EEPROM | Yes | |
| Short Description | Maximum Rated Motor Velocity | |||
Description
| The MSPEED setting fixes the upper limit for the following amplifier parameters: VLIM, VLIMN, 5/6 * VOSPD. From firmware 4.0 the limit can be set by different units. Details are shown at parameter VUNIT . |